|
CAN总线器件
( INTERFACE – Controller Area
Network (CAN) Products )
|
Part # |
Operating Voltage (V) |
Temperature Range (°C) |
Tx Buffers |
Rx Buffers |
Filters |
Masks |
Interrupt Output |
Unique Features |
Packages |
|
|
MCP2510(1) |
2.7 to 5.5 |
-40 to +125 |
3 |
2 |
6 |
2 |
Yes |
CAN 2.0B Active controller with SPI interface to MCU,
3 transmit buffers, 2 receive buffers, HW and SW
message triggers |
18-Pin PDIP, 18-Pin SOIC, 20-Pin TSSOP |
|
|
MCP2515 |
2.7 to 5.5 |
-40 to +125 |
3 |
2 |
6 |
2 |
Yes |
MCP2510 pin compatible upgrade with enhanced features
including higher throughput and data byte filtering |
18-Pin PDIP, 18-Pin SOIC, 20-Pin TSSOP |
|
|
MCP25020 |
2.7 to 5.5 |
-40 to +125 |
3 |
2 |
2 |
1 |
N/A |
CAN 2.0B Active I/O Expander, Configurable I/O, 2 PWM
outputs |
14-Pin PDIP, 14-Pin SOIC |
|
|
MCP25025 |
2.7 to 5.5 |
-40 to +85 |
3 |
2 |
2 |
1 |
N/A |
CAN 2.0B Active I/O Expander, Configurable I/O, 2 PWM
outputs, One-wire CAN option |
14-Pin PDIP, 14-Pin SOIC |
|
|
MCP25050 |
2.7 to 5.5 |
-40 to +125 |
3 |
2 |
2 |
1 |
N/A |
Mixed-Signal CAN 2.0B Active I/O Expander, Configurable
I/O, 4 10-bit ADCs, 2 PWM outputs |
14-Pin PDIP, 14-Pin SOIC |
|
|
MCP25055 |
2.7 to 5.5 |
-40 to +85 |
3 |
2 |
2 |
1 |
N/A |
Mixed-Signal CAN 2.0B Active I/O Expander, Configurable
I/O, 4 10-bit ADCs, 2 PWM outputs, One-wire CAN option |
14-Pin PDIP, 14-Pin SOIC |
|
|
MCP2551 |
4.5 to 5.5 |
-40 to +125 |
n/a |
n/a |
n/a |
n/a |
N/A |
High-Speed CAN Transceiver (1 Mbps max. CAN bus speed),
ISO11898 compatible, Industry standard pinout |
8-Pin PDIP, 8-Pin SOIC |
|
返回Back
红外接口器件
( INTERFACE – Infrared Products )
|
Part # |
Operating Voltage (V) |
Operating Temperature Range (°C) |
Max. Baud Rate (Kbaud) |
Unique Features |
Packages |
|
|
MCP2120 |
2.5 to 5.5 |
-40 to +85 |
325 |
UART to IR encoder/decoder with both hardware and
software baud rate selection |
14-Pin PDIP, 14-Pin SOIC |
|
|
MCP2122 |
1.8 to 5.5 |
-40 to +85 |
16x less than clock input |
UART to IR encoder/decoder |
8-Pin PDIP, 8-Pin SOIC |
|
|
MCP2140 |
2.7 to 5.5 |
-40 to +85 |
9.6 |
IrDA®protocol handler plus bit encoder/ decoder, Fixed
baud rate, Low-Cost |
18-Pin PDIP, 18-Pin SOIC, 20-Pin SSOP |
|
|
MCP2150 |
3.0 to 5.5 |
-40 to +85 |
115.2 |
IrDA® Standard protocol handler plus bit
encoder/decoder on one chip for DTE applications,
Programmable ID |
18-Pin PDIP, 18-Pin SOIC, 20-Pin SSOP |
|
|
MCP2155 |
3.0 to 5.5 |
-40 to +85 |
115.2 |
IrDA® Standard protocol handler plus bit
encoder/decoder on one chip for DCE applications,
Programmable ID |
18-Pin PDIP, 18-Pin SOIC, 20-Pin SSOP |
|
返回Back
LIN总线产品
( INTERFACE – LIN Transceiver
Products )
|
Part # |
Description |
Vreg Output Voltage (V) |
Operating Temperature Range (°C) |
Vreg Output Current (mA) |
VCCRange (V) |
Max Baud Rate |
LIN Specification Supported |
Packages |
|
|
MCP201 |
LIN Transceiver with integrated VREG |
4.75 to 5.25 |
-40 to +125 |
50(1) |
6.0 to 18(2) |
20 Kbaud |
Revision 1.2 |
8-pin PDIP, 8-pin SOIC |
|
返回Back
串行I/O扩展器
( INTERFACE – Serial Peripherals )
|
Part # |
Description |
Operating Voltage (V) |
Operating Temperature Range (°C) |
Bus Type |
Max. Bus Frequency (kHz) |
Features |
Packages |
|
|
MCP23008 |
8-bit I/O Port Expander |
1.8 to 5.5 |
-40 to +85 |
I2C™ |
3400 |
3 HW address pins, HW interrupt, 25 mA source/sink
capability per I/O |
18-Pin PDIP, 18-Pin SOIC, 20-Pin SSOP |
|
|
MCP23S08 |
8-bit I/O Port Expander |
1.8 to 5.5 |
-40 to +85 |
SPI™ |
10000 |
2 HW address pins, HW interrupt, 25 mA source/sink
capability per I/O |
18-Pin PDIP, 18-Pin SOIC, 20-Pin SSOP |
|
|
MCP23016 |
16-bit I/O Port Expander |
2.0 to 5.5 |
-40 to +85 |
I2C™ |
400 |
3 H/W address inputs, HW interrupt, 25 mA source/sink
capability per I/O |
28-Pin PDIP, 28-Pin SOIC, 28-Pin SSOP, 28-Pin 6x6 QFN |
|
返回Back
|
